Audio Technica AT-LP7 Fully Manual Belt Drive Turntable (black)

<AT-LP7
Audio-Technica began in 1962 as a designer and manufacturer of high-end phonograph cartridges, bringing to the audio world the innovative Dual Moving Magnet stereo cartridge with its outstanding channel separation, extended frequency response and superb tracking.

The AT-LP7 builds on this heritage.
strong>

SPECIFICATIONS
TURNTABLE
Type 2-speed, fully manual operation
Motor DC motor
Drive Method Belt drive
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Polyoxymethylene
Wow and Flutter <0.08% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio >60 dB
Output Level Pre-amp “PHONO”: 4.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE (MM)”: 280 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain MM: 36 dB nominal, RIAA equalized MC: 56 dB nominal, RIAA equalized
Power Supply Requirements 100 to 240 V AC, 50/60 Hz, 0.6 A max.
Dimensions 450.0 mm (17.72″) W x 352.0 mm (13.86″) D x 157.0 mm (6.18″) H
Weight 8.3 kg (18.30 lbs.), without dust cover
Accessories Included VM520EB Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; dust cover
Replacement Cartridge VM520EB
Notes Tonearm Specifications Type: Static balanced J-shaped tonearm Effective length: 247 mm Overhang: 17 mm Maximum tracking error angle: Less than 2.5° Stylus pressure adjustment range: 0 to 2.5 g Applicable cartridge weight range (including headshell): 15 to 20 g